Description
Details
It doesn't matter whether you are new or want to use your existing system: With the switch module, conventional 2 x 4-button control panels and other control panels with a button function can be used to control KATO and ROKUHAN switches. A total of 4 points can be switched with each point module.
The points, the control panel and the power supply are connected via screw terminals. Furthermore, switching with reed contacts and digital switching with an upstream magnet article decoder is possible. Soldering is not necessary. The connection is made to direct or alternating current with 10 to 16 volts.
The NOCH points module can also be connected to solenoid decoders. On the output side, some decoders have negative potential on the common connection and others have positive potential. The NOCH points module requires positive potential on the common connection, often referred to as " clamp C" , on the respective switching output of the decoder. Such decoders are, for example: LENZ LS100, item number 1110 and ESU Switch Pilot V2.0 4-fold solenoid item decoder, item number 51820.
Note: It is therefore essential to pay attention to the information provided by the decoder manufacturer.
Contents
- 1 x Switch module
