This control box can be used to operate up to four G Gauge turnouts, signals, uncoupler tracks, or other accessories. Each momentary rocker switch operates an accessory item. This control box is connected to a source of alternating current (18 volts) by means of the connections on the rear of the control box.
The 60130 Converter is required when using a switched mode power pack (51090).
An LED indicates whether the control box is being supplied with current. Colour-coded connections on the rear of the control box facilitate connections. Adhesive labels are included to identify what is connected to a switch on the control box.
Length | 126mm |
---|---|
Width | 116mm |
Height | 66mm |