DCC Point Controller Single (1 Point)

Details

Single output DCC Accessory Decoder which is easy to fit and just requires two wires to your DCC Bus. Use the screw terminals to attach your solenoid point motor to the decoder and attach the power wires to the nearest piece of track or accessory bus wire. This unit features a built in CDU for efficient operation of solenoid motors.

This unit is easy to programme too, just press the "LEARN" button and enter an address on your DCC controller. Using this method you can easily synchronise points and signals together by giving them the same address.

Features

• Easy to set up
• Capacitor built in
• Screw Terminals - No Soldering

Specifications