DCC Decoder 6 Pin 2fn 1a with 90 Degree Angled Fit

A 6 Pin DCC Decoder designed specifically for use in the Graham Farish N scale Class 3F ‘Jinty’ (item No. 372-21x) and Class 64XX ‘Pannier Tank’ (item No. 371-98x) locomotives. Highlights include: Dual-mode DCC/DC decoder with Back EMF function 1.0A continuous load 2 powered function outputs Operating Modes NMRA DCC with 14, 28 and 128 speed steps Short and Long addresses Advanced consist addressing DCC and DC operation Motor Control Features 1.0A continuous load Back EMF speed regulation Silent 15.6Khz pulse width modulation of motor voltage Adjustable acceleration and braking 15 pre-set speed curves 28-point user programmable speed curve Supports brake on DC Function Outputs 2 powered function outputs 100mA load per output NMRA function mapping to match outputs with user selectable function key Dimensions 14.5mm x 9.5mm x 3.5mm Default Address Address 3 This decoder is manufactured on behalf of Bachmann Europe by Soundtraxx. For full technical specifications and instructions, please refer to the Soundtraxx user guide for MC1 decoders at www.soundtraxx.com/manuals/mobile-decoders