ECoSDetector for RailCom (4 Digital Inputs)

ECoSDetector for RailCom (4 Digital Inputs)

Details:

Unlock advanced train detection and automation capabilities with the ESU ECoSDetector RC Feedback Module. Designed for use with ESU ECoS command stations and compatible Central Station Reloaded systems, this specialist feedback module combines track occupancy detection with RailCom® locomotive identification, allowing layouts to determine not only whether a section is occupied, but exactly which locomotive is present.

The ECoSDetector RC monitors four independent track sections, each equipped with integrated RailCom® "local detector" functionality. When used with compatible RailCom®-enabled decoders, the module can identify individual locomotives within monitored sections, opening up powerful automation possibilities for hidden storage yards, route setting, block control and signalling systems.

Each input also functions as a current-sensing occupancy detector, ensuring reliable block detection even when a locomotive or vehicle is not equipped with a RailCom® decoder. With support for up to 3A per detection section, the ECoSDetector RC is suitable for a wide range of scales and operating requirements.

Connected directly via the ECoSlink communication bus, the module is automatically recognised by the command station and can be configured through the ECoS user interface. Galvanic isolation between the feedback electronics and command station helps ensure dependable operation and interference-free data transmission. Automatic firmware updates via the command station keep the module current with future software enhancements.

By identifying the exact locomotive within a monitored block, the ECoSDetector RC enables advanced layout automation functions that are not possible with conventional occupancy detectors. Automated route selection, intelligent hidden siding management, level crossing control and locomotive-specific operating sequences can all be implemented when used with RailCom®-equipped decoders and ECoS route management features. Electronic input filtering also improves reliability on layouts with less-than-perfect track conditions.

Features:

• Four RailCom®-enabled feedback sections with locomotive identification
• Detects both track occupancy and individual locomotive addresses
• Integrated current-sensing occupancy detection on all inputs
• Direct ECoSlink connection with automatic system recognition
• Galvanically isolated design for reliable feedback operation
• Automatic firmware updates via compatible command stations

Additional Information:

• Number of Detection Inputs: 4
• RailCom® Capability: All 4 inputs support RailCom® locomotive identification
• Detection Method: Current Sensing (OPTO)
• Maximum Current Per Input: 3A
• Connection Bus: ECoSlink
• Compatibility: ESU ECoS and Central Station Reloaded with ESU Update
• Isolation: Galvanically Isolated Feedback Electronics
• Automatic Device Recognition: Yes
• Firmware Updates: Automatic via Command Station
• Supplied With: Connection terminals, ECoSlink cable and instruction manual

Measurements:

• Length: 86mm
• Width: 86mm
• Height: 25mm