D1663 Van BR M5823

D1663 Van BR M5823

Following the grouping of the railways in 1923, the newly formed London, Midland and Scottish Railway inherited a host of ageing and dilapidated freight stock from their pre-grouping predecessors.

To remedy this and remain competitive, the LMS undertook a massive modernisation program of its freight stock, though many of the designs were either adapted or simply copied from pre-grouping companies a swathe of brand-new prototypes started rolling off the production line in late 1923. The humble box van was no exception.

Production of the newly conceived 9ft wheelbase Dia.1663 12-Ton Vans began in 1924, and 850 wagons were produced over 2 years. Standing out amongst a sea of hinged doored and wooden-ended vans, the Dia.1663 vans featured a stylish sliding door, corrugated steel ends, and external steel cross braces at one end to facilitate the clearance of the sliding doors.

The LMS had a habit of applying new diagram numbers to almost identical prototypes that featured only minor differences, and the sliding door 12-Ton Vans of the 1920s and 30s were no different.

Much like their earlier counterparts, the Dia.1832A 12-ton vans had the same sliding door, 9ft wheelbase, corrugated steel end, and cross-brace design, however, they also featured a single ventilator bonnet at either end. Some variants were produced with roof vents for extra ventilation.

The Dia.1832A were then fitted with different headstocks and buffers. With added ventilation, a greater variety of freight traffic could be transported throughout the LMS network and beyond.

This later diagram clearly refined the design as a whopping 3,450 vans were built between 1929 and 1931.

Surviving into the late years of Nationalisation, both the LMS D1832A and D1663 12-Ton Vans could be found up and down the country, some still soldiered on in departmental use way into the 1970s.

Model

1:76 Scale Wagon decorated in BR livery. This model features lots of expertly applied details as based on the prototype, a high level of body detail and excellent running characteristics.

Features

• 1:76 Scale Model
• NEM Couplings
• Highly Detailed Finish
• No roof ventilators
• 2-shoe unfitted brakes
• RCH axleboxes
• 3-hole disc wheels running in metal bearings
• High level of detail above and below the floor line
• High quality livery application

Contents

• 1 x Rapido Trains Wagon

Specifications

Measurements

Don't Miss Out

Don't forget to check out the full range of models available from Rapido Trains.

What to Do Next

If you wish to purchase this item, click the "Add To Cart" Button, Alternatively if this item shows out of stock, click the "Add to Wishlist" button to be notified when this item comes into stock.

Shop our full range of model railway supplies today, including engines, track pieces, scenery, and other accessories.